In this paper, the pulse current method for detecting partial discharge ( PD) is analyzed, and the PD test circuit was discussed. 笔者详细分析了电流互感器局部放电的检测方法-脉冲电流法,以及局部放电检测的试验回路。
The main test circuit adopts the auxiliary amplifier method with phase compensation circuits in order to avoid self-excitation. 运放参数主测试电路采用辅助放大器测试法设计,通过相位补偿网络消除电路自激现象。
The structure of the main test circuit is automatically altered by switcher matrix when various parameters are measured. 不同参数测试电路及量程的自动切换通过开关矩阵实现。
The test circuit, test equipment, calculating formula and test methods are introduced in this paper. 本文简要地介绍了点火线圈的点火能量测试线路、测试设备、计算公式和测试方法。
The simulation and experimental results verify that the test circuit with a radial stub is better than that without. 模拟和测试结果都表明,采用扇形线的测试电路性能较好。
The Fault Diagnosis of Missile Test Circuit Based on GIS and Semi-qualitative Techniques 基于GIS技术与半定性推理的导弹测试电路故障诊断
A SOC Test Circuit Design and Implement Based on JTAG 一种基于JTAG的SOC测试电路设计及实现
Test Circuit Using a Kind of Variable Frequency Technology to Compensate for Breaking Current Attenuation 一种采用变频技术来补偿开断电流衰减的试验回路
Also, the maintainability of this system is good with full on-board test circuit. 系统具有完备的调试电路,良好的可维护性。
Modern thyristor valves for HVDC are of high power rating and difficult to be tested in a conventional back-to-back test circuit. 现代晶闸管阀的额定容量很高,难以使用传统的背靠背试验回路进行试验,合成试验回路是一种替代方法。
Hardware includes the test circuit, wireless transceiver and host computer communications; we also developed corresponding software programs. 硬件部分包括测试电路、无线收发和上位机通信,并编制了相应的软件程序。
Experimental Study on Composite Test Circuit for Current limiting Fuse with High Ratings 高压大电流限流熔断器合成试验回路的实验研究
The article gives us the principle and structure of an on-line test circuit for transistor β value. 文章介绍了一种晶体管β值在线测试电路的工作原理及结构。
The electromagnetic induction coil may be used for signal detecting of high capacity current test circuit and circuit breaker. 电磁感应线圈(茹可夫线圈)可用于大电流试验回路和断路器的信号检测。
Experimentation indicates that this system can test circuit boards of locomotive control system. 经实验测试,证明该系统可以检测机车控制系统的各类板卡。
TMS320VC33 will be used to process data, and this paper put forwards test circuit associated with DSP. 采用TMS320VC33进行数据处理,给出了与DSP相连接的相关检测电路。
The paper gives the concept of cut-off current of vacuum circuit breaker, presents the test circuit, analyses the feasibility of peak voltage sampling on inductor, introduces a microprocessor based test system. 简述了对真空开关截流值的定义,给出了截流测试电路,分析了电感端电压峰值取样的可行性,介绍了一种微机测试系统。
Finally, test circuit and program of ICE are introduced and test methods of each functions are also gave. 最后,介绍了在线仿真器的测试程序和测试电路,并给出其各个仿真功能的测试方法,完成了测试。
Test circuit, test method and results of race hazard circuit are presented in this paper. 本文给出竞争冒险的测试电路、测试方法和测试结果。
The core to design a synthetic test circuit is to correctly reproduce the stresses applied on the thyristor valves. 设计合成试验回路的核心在于如何正确地再现晶闸管阀上的负荷。
This paper introduces the structure principle and making method for a kind of assembly test circuit. 介绍了一种测试工装电路的结构原理及制作方法。
According to the structure of hydraulic steering booster s and the work principle of steering system, design of the test circuit and test principle for a steering booster are introduced in the article. 根据液压转向助力器的结构和转向系统的工作原理,介绍了一种转向助力器检测回路的设计和测试原理。
This paper introduces the principle of operation and system structure of CCD sensor in the photoelectric precision measurement diameter system. The test circuit is given. 介绍了CCD传感器在光电精密测径系统中的工作原理、系统结构及检测电路系统。
Aiming at the typical test circuit, the dissertation analyzes its designing idea and working principle. 根据用户要求并结合所编写的试验大纲,设计了试验台的液压系统,针对典型的试验回路,分析了其设计思想和工作原理。
And the concrete operation of temperature rise test of autotransformer, the simplified test circuit and precision measurement were discussed. 分析了自耦变压器各绕组段中的电流,探讨了自耦变压器温升试验中的具体操作、简化试验线路和精确测量。
The operational principle of applied voltage method, the design of test circuit and outgoing line mechanism etc. 文中首先介绍了外加电压法的工作原理;测试回路和引线机构的设计等;
The main part of the hardware test circuit is built respective and the experimental study is completed. 分别对主要环节搭建了硬件测试电路,进行了实验研究。
This thesis designs test circuit of probe current and voltage and works the serial communication between PC and SCM out, and realizes the real-time sampling and display of the characteristic curve. 设计了探针电流、电压检测电路,并很好的解决了PC和单片机的串口通信,实现了实时采样和特性曲线的实时显示。
The strain data has been arithmetic processed which is convenient for subsequent analysis. Finally, a test circuit board has been made and debugged. Test data has been obtained. The design feasibility and rationality have been verified. 最后,制作了实验电路板,对其进行了调试,获得了实验数据,验证了设计的可行性和合理性。